Ramsol Disinfectant Sanitiser Spray

Ramsol Alcohol Sanitiser Spray is a revolutionary mist spray designed to sanitise and disinfect difficult-to-reach and intricate areas with full surface coverage.

This product deals rapidly and effectively with an extensive list of bacteria, including, but not limited to: Staphylococcus aureus (MRSA or Golden Staph), Pseudomonas aeruginosa, E.coli, Enterococcus, Faecalis (VRE), Acinetobacter, Salmonella choleraesuis, Acetobacter, Proteus vulgaris, S aureus and S typhosa.

Characteristics

• The No.1, super fast sanitiser application method
• No need to wipe off after application
• Zero set-up time
• Fully Portable, No external Power source required
• With 70% Ethanol (alcohol)
• Kills 99.9% of bacteria
• Reusable Gun & Hose

Uses

• For use on hard and soft surfaces
• Disinfectant sanitiser spray has a pine scent
• Provides streak-free finish on most surfaces including glass and Stainless Steel
• Recyclable Steel
• Made in Australia with Australian Ethanol

Disinfectant Sanitiser Spray Coverage

• 500mL aerosol (12.5 square metres)
• 7 Litre Canister (between 180 – 300 square metres)
• 22 Litre Canister (between 600 – 1000 square metres)

Direction For Disinfectant Sanitiser Spray Use

1. Connect the gun and hose using a shifter
2. Connect a hose to the canister and ensure that all connections are tight and leak-free.
3. Turn the system on using the valve on top of the canister, by rotating the tap anti-clockwise.
4. Use the adjustment wheel on the gun to control the flow rates; the adjustment wheel should be in the fully open position.
5. Apply disinfectant sanitiser spray directly to the surface from around 1/2 meter away.
6. If fogging move the gun around the area with a clean
   sweeping motion.

HANDLING AND STORAGE

• Consult the material safety data sheet before use.
• DO NOT store at temperatures over 50°C.
• Avoid exposure to direct sunlight.
• DO NOT store directly on the concrete floor.
• For optimum disinfectant sanitiser spray performance, store at 18°C.
• When connected, keep the valve open and hose pressurised at all times.
• DO NOT close the valve until ready to connect to the new cylinder.
• Release pressure in the hose before disconnection.
• Always test the product to determine suitability for your particular application before use.
• DO NOT spray on broken skin.
• Stop use if rash or irritation occurs.
• Avoid prolonged spraying on the skin.